Tổng hợp vật liệu composite Fe2O3/CoFe2O4 với kích thước nano ứng dụng làm anode cho pin lithium – ion

Ngô Thị Mỹ Dung1, Trần Ngọc Trung1, Phan Anh Huy1, Nguyễn Tuấn Lợi2,3, Ngô Hải Đăng1,
1 Khoa Khoa học ứng dụng, Trường Đại học Sư Phạm Kỹ Thuật Thành phố Hồ Chí Minh, Việt Nam
2 Viện Nghiên Cứu Khoa học Cơ bản và Ứng dụng, Đại học Duy Tân, Thành phố Hồ Chí Minh 70000, Việt Nam
3 Khoa Môi trường và Công nghệ Hoá, Đại học Duy Tân, Thành phố Đà Nẵng 50000, Việt Nam

Nội dung chính của bài viết

Tóm tắt

Trong nghiên cứu này, vật liệu nanocomposite Fe2O3/CoFe2O4 (CFO) được tổng hợp bằng phương pháp đồng kết tủa tại các giá trị pH từ 9 đến 11 và xử lý nhiệt ở 750°C trong 3 giờ. Kết quả XRD xác nhận sự tồn tại của hai pha CoFe2O4 và Fe2O3, với mức độ kết tinh tăng khi pH tăng. Ảnh SEM cho thấy kích thước hạt giảm từ ~51 nm xuống còn ~35 nm khi pH tăng và phân bố hạt đồng đều hơn. Khi ứng dụng làm điện cực anot cho pin Li-ion, các điện cực CFO thể hiện dung lượng phóng điện cao và khả năng ổn định sau nhiều chu kỳ. Mẫu CFO_pH 10 đạt dung lượng cao nhất ở chu kỳ đầu (969.12 mAh/g) và duy trì 906.97 mAh/g sau 40 chu kỳ, với hiệu suất Coulomb gần 100% từ chu kỳ thứ hai. Sự thay đổi kích thước hạt, mức độ kết tinh và phân bố pha giữa các mẫu ảnh hưởng trực tiếp đến hiệu suất điện hóa. Kết quả cho thấy CFO là vật liệu tiềm năng thay thế than chì thương mại làm anode cho pin lithium-ion.

Chi tiết bài viết

Tài liệu tham khảo

Bui, H. T., Tran, T. G., Tran, N. T., Ngo, T. M. D., Ngo, H. D., Pham, L. T., Van Tran, M., Nguyen, D. L. T., Bui, T. N. T., & Nguyen, T. L. (2025). Fabrication of Fe2O3/CoFe2O4 pH-controlled nanocomposites as novel anodes for lithium-ion batteries. Journal of Materials Science: Materials in Electronics, 36(2), 135. https://doi.org/10.1007/s10854-024-14177-w
Buqa, H., Goers, D., Holzapfel, M., Spahr, M. E., & Novák, P. (2005). High rate capability of graphite negative electrodes for lithium-ion batteries. Journal of the Electrochemical Society, 152(2), A474. https://doi.org/10.1149/1.1851055
Dong, L., Wang, Z., Mi, C., Zhao, W., Qin, C., Luo, C., & Wang, Z. (2024). Defect-rich hierarchical porous spinel MFe­2O4 (M = Ni, Co, Fe, Mn) as high-performance anode for lithium ion batteries. Materials Today Chemistry, 35, 101853. https://doi.org/https://doi.org/10.1016/j.mtchem.2023.101853
Dong, Y., Chui, Y.-S., Yang, X., Ma, R., Lee, J.-M., & Zapien, J. A. (2015). Facile Synthesis of Hollow Mesoporous CoFe2O4 Nanospheres and Graphene Composites as High-Performance Anode Materials for Lithium-Ion Batteries. ChemElectroChem, 2(7), 1010-1018. https://doi.org/10.1002/celc.201500046
Huang, G., Zhang, F., Zhang, L., Du, X., Wang, J., & Wang, L. (2014). Hierarchical NiFe2O4/Fe2O3 nanotubes derived from metal organic frameworks for superior lithium ion battery anodes [10.1039/C4TA00200H]. Journal of Materials Chemistry A, 2(21), 8048-8053. https://doi.org/10.1039/C4TA00200H
Jin, Y.-H., Seo, S.-D., Shim, H.-W., Park, K.-S., & Kim, D.-W. (2012). Synthesis of core/shell spinel ferrite/carbon nanoparticles with enhanced cycling stability for lithium ion battery anodes. Nanotechnology, 23(12), 125402. https://doi.org/10.1088/0957-4484/23/12/125402
Li, Z. H., Zhao, T. P., Zhan, X. Y., Gao, D. S., Xiao, Q. Z., & Lei, G. T. (2010). High capacity three-dimensional ordered macroporous CoFe2O4 as anode material for lithium ion batteries. Electrochimica Acta, 55(15), 4594-4598. https://doi.org/10.1016/j.electacta.2010.03.015
Liu, S., Liu, X., Zhao, J., Tong, Z., Wang, J., Ma, X., Chi, C., Su, D., Liu, X., & Li, Y. (2016). Three dimensional hierarchically porous crystalline MnO2 structure design for a high rate performance lithium-ion battery anode. RSC Advances, 6(88), 85222-85229. https://doi.org/10.1039/C6RA16430G
Narsimulu, D., Rao, B. N., Nagaraju, G., Yu, J. S., & Satyanarayana, N. (2020). Enhanced energy storage performance of nanocrystalline Sm-doped CoFe2O4 as an effective anode material for Li-ion battery applications. Journal of Solid State Electrochemistry, 24(1), 225-236. https://doi.org/10.1007/s10008-019-04484-2
Ruiz-Agudo, C., Putnis, C. V., Ruiz-Agudo, E., & Putnis, A. (2015). The influence of pH on barite nucleation and growth. Chemical Geology, 391, 7-18. https://doi.org/10.1016/j.chemgeo.2014.10.023
Safi, R., Ghasemi, A., Shoja-Razavi, R., & Tavousi, M. (2015). The role of pH on the particle size and magnetic consequence of cobalt ferrite. Journal of Magnetism and Magnetic Materials, 396, 288-294. https://doi.org/10.1016/j.jmmm.2015.08.022
Wang, J., Zhang, H., Lv, X., Nie, K., Gao, X., Zhong, J., & Sun, X. (2016). Self-supported ultrathin mesoporous CoFe2O4/CoO nanosheet arrays assembled from nanowires with enhanced lithium storage performance. Journal of Materials Science, 51(14), 6590-6599. https://doi.org/10.1007/s10853-016-9902-y
Wang, Y., Su, D., Ung, A., Ahn, J.-h., & Wang, G. (2012). Hollow CoFe2O4 nanospheres as a high capacity anode material for lithium ion batteries. Nanotechnology, 23(5), 055402. https://doi.org/10.1088/0957-4484/23/5/055402
Wang, Y., Wu, S., Wang, C., Wang, Y., & Han, X. (2019). Morphology controllable synthesis of NiO/NiFe2O4 hetero-structures for ultrafast lithium-ion battery. Frontiers in Chemistry, 6, 654. https://doi.org/10.3389/fchem.2018.00654
Wang, Y., Yang, L., Hu, R., Sun, W., Liu, J., Ouyang, L., Yuan, B., Wang, H., & Zhu, M. (2015). A stable and high-capacity anode for lithium-ion battery: Fe2O3 wrapped by few layered graphene. Journal of Power Sources, 288, 314-319. https://doi.org/10.1016/j.jpowsour.2015.04.076
Wu, N., Shen, J., Sun, L., Yuan, M., Shao, Y., Ma, J., Liu, G., Guo, D., Liu, X., & He, Y.-B. (2019). Hierarchical N-doped graphene coated 1D cobalt oxide microrods for robust and fast lithium storage at elevated temperature. Electrochimica Acta, 310, 70-77. https://doi.org/10.1016/j.electacta.2019.04.115
Xia, H., Zhu, D., Fu, Y., & Wang, X. (2012). CoFe2O4-graphene nanocomposite as a high-capacity anode material for lithium-ion batteries. Electrochimica Acta, 83, 166-174. https://doi.org/https://doi.org/10.1016/j.electacta.2012.08.027
Zhang, C., Chen, Z., Wang, H., Nie, Y., & Yan, J. (2021). Porous Fe2O3 Nanoparticles as Lithium-Ion Battery Anode Materials. ACS Applied Nano Materials, 4(9), 8744-8752. https://doi.org/10.1021/acsanm.1c01312
Zhang, J., Jiang, H., Zeng, Y., Zhang, Y., & Guo, H. (2019). Oxygen-defective Co3O4 for pseudo-capacitive lithium storage. Journal of Power Sources, 439, 227026. https://doi.org/10.1016/j.jpowsour.2019.227026
Zhao, L., Ding, B., Qin, X.-Y., Wang, Z., Lv, W., He, Y.-B., Yang, Q.-H., & Kang, F. (2022). Revisiting the Roles of Natural Graphite in Ongoing Lithium-Ion Batteries. Advanced Materials, 34(18), 2106704. https://doi.org/10.1002/adma.202106704
Zheng, X., Shen, G., Li, Y., Duan, H., Yang, X., Huang, S., Wang, H., Wang, C., Deng, Z., & Su, B.-L. (2013). Self-templated synthesis of microporous CoO nanoparticles with highly enhanced performance for both photocatalysis and lithium-ion batteries [10.1039/C2TA00536K]. Journal of Materials Chemistry A, 1(4), 1394-1400. https://doi.org/10.1039/C2TA00536K